Building a modern computer is remarkably easy nowadays.
It is often consideredLEGO for adultsas computer components are modular now.
However, air cooling management is way more complex.
Aside from the PC configuration, better airflow is a crucial factor in determining how a PC will perform.
You may have top-of-the-line specs for your PC, but they will underperform if there isnt any good airflow.
I believe you are already well informed about this.
The thing that you dont know is how to optimize the airflow of your system.
Well, its complex but not rocket science.
Ill share those exclusive tips and tricks in this article.
Lets begin the expedition.
Types of Airflow Configuration
Configuring the airflow is more important than having a better specification of hardware.
Keeping the system cool and optimal is the most crucial job for a user.
To optimize the airflow, you better understand the airflow configuration.
There are three ways to configure a PCs airflow.
Positive air pressure means the intake airflow is more significant than the exhaust airflow.
Intake fans have a higher airflow rate compared to exhaust fans.
This stagnant air can get hot from the internal components and end up raising the temperature of the system.
Negative air pressure means the exhaust airflow is more prominent than the intake airflow.
This configuration includes a higher exhaust airflow rate than the intake fans.
Though it is an effective system cooling option, it can often pull more dust into your system.
However, in some uncommon situations, negative air pressure configuration doesnt draw much dust into the system.
Equal air pressure is the balance between positive and negative air pressure.
This is the best option that keeps the system both cool and clean.
As long as the airflow is balanced, plenty of air will flow in and out easily.
Here are the methods to optimize the PC airflow:
1.
Configure Your PC Fans
First of all, take a look at the fans that your system currently has.
Note down the number of intake and exhaust fans.
In case there is any fan that is causing noise, try disconnecting and cleaning it.
If the noise persists, replace the faulty fans.
So, lets get started by getting the latestFix Oculus Quest 2 not Detected to PC.
The size of your box determines how many fans you are able to install.
You should install two to three intake fans on the front side and one exhaust fan for mid-tower cases.
you might add more fans to the system as it has that space to fit in.
So having three fans is a minimum for full tower cases, and I recommend it as well.
In some cases, extra fans on the upper rear of the case help the CPU cool more efficiently.
It is quite important to choose the perfect fan size for any system.
Because any fan size mismatch causes your system to overheat and accumulate additional dust.
Here is a table that includes fan size and mounting size:
2.
Configure the Fan Control Speeds
There are several ways to control fan speeds.
A large number of manufacturers offer a wide range of products to accomplish this.
However, most BIOS supports fan speed adjustment.
It adjusts the speed curve or allows full automation on the fan speed when its needed.
you’ve got the option to get the temperature reading by using temperature sensors.
you might even control each fan individually.
This module allows each fan to adjust its speed according to the temperature reading.
Then you’re free to see how much air is coming from the intake and exhaust fans.
I dont recommend those fans as they are not ideal and you should replace them right away.
This is a common scenario when you buy and install extremely cheap fans.
you’re free to use a fog blaster to check the airflow of your system.
you could get it from the toy or hobby store.
you’re able to take the airflow checking to another level by using airflow meters.
All you oughta do is, place the meters in various places and monitor how good the airflow is.
Also, check out our separate post onFix Mass Effect Legendary Edition PC.
Check the Air Filters
Check the filters on your case to see how thick the filters are.
As long as they are thick there is a high possibility that the airflow gets hampered.
This will make heatsinks, fans, and your system dirty easily.
So get air filters that are good at filtration and easy to clean.
Maintain Obstruction-Free Airflow
you gotta erase the path where the exhaust fans are situated.
A very common scenario is the unused power supply cables that often tie in a bunch.
These tied cables are enough to obstruct the airflow.
you better keep the cable management as tidy as possible.
Wrapping up
There you go!
Hopefully, you get all the information and the methods to optimize the airflow of your box.
Just follow those methods and achieve a superbly optimized airflow system on your PC.
