Transporting your desktop PC is different from ordinary objects.
It needs extra care and protection from the outside as well as inside.
In addition, how to pack your components properly before moving your desktop.
Read the full article to keep your PC in a single piece during transportation.
Your desktop is a combination of small and large fragile components.
Sometimes, the process can be confusing, or you may forget some vital procedure.
But in this article, I will help you with the safety precautions.
After removing all the connections, you may face difficulties attaching them to the right place.
A picture can help you to overcome those difficulties.
Unplug Everything
Remove all the power, PSU, and LAN connections from your PC.
Detach mouse, keyboard, mic, and speaker connection from your desktop.
Remove all the required wires from the inside of the PC.
After unplugging the wire, attach them to the PC casing using tape.
It will prevent the wires from moving around and damaging any components.
Remove the Mechanical Drive
Mechanical hard drives are sensitive and fragile.
Your hard drive can get damaged because of the bumpy road.
Remove all the mechanical drives from your PC.
Todays mechanical drives are straightforward to remove.
HDDs are mounted with screws and wires.
it’s possible for you to simply remove HDDs by removing screws and wires.
you could check out our review on how toFix PC Fans Loud When Idle.
SecureCPUCooler
CPU coolers are massive and heavy.
They are mounted with screws.
Check the screw mounting before packing your PC.
Any loose screws or nuts can cause damage to the cooler and components.
If the screw is loose, it can come out with continuous bumping on the road.
A heavy CPU cooler can gain momentum during the journey.
It can detach from the PC and smash all the components inside.
If you have a big one, remove it to keep your PC safe.
Remove GPU
GPUs are larger components attached to the desktop case and motherboard.
A rough road can damage both the GPU and motherboard.
The GPU can damage other components if it comes out from the attachment.
Remove the GPU by removing the screw and cables.
Check out our experts testedbest Case Fans.
Packing in the original box is effortless.
But, it can be tricky if you dont have all the components boxes.
However, you’re able to maintain your desktop with things you have.
It can be a concerning issue if you dont have proper packing items.
But, you could handle those situations easily by reading the technique below.
The original box contains cushions that protect your PC components from any damage.
But, if you dont have the original boxes, put the components in anti-static bags.
Warp the bags in a bubble wrap and protect your components from scratch or damage.
Cut the material into the preferred size and put them beside the components.
Wrap It Up
Check out the comparison betweenNZXT Kraken Z63 & Noctua NH-D15.
Box Your Monitor
The monitor screen is very fragile.
One good stroke, and your screen is gone.
While transporting your monitor, keep an eye to secure the screen.
Use the original monitor box for the best protection.
If you dont have a monitor box, give a cushion on the screen to keep it safe.
Cover the full monitor using an air-filled plastic wrap.
How to Transport Your Desktop PC
Your PC is packed, and now its time to go.
Desktop packaging can take quite a good amount of space.
Give your desktop package the most secure place in your car.
Dont keep anything heavy on the top of the box.
Its better not to stack your desktop on the car body.
It can damage your desktop heavily when the car bumps.
Put your desktop on a spongy surface.
you’re able to use clothes, towels, pillows, or blankets as the surface.
Lay down your desktop and monitor while transporting.
It gives better stability to your PC.
Also, your motherboard and CPU cooler will be much safer in this position.
Keep your monitors screen on the upper side, and dont put anything on the top of the screen.
If you are transporting in a much smaller car, keep your desktop on the passenger seat.
Warp it with some towels or blankets for better protection.
Fasten the seat belt if its possible.
FAQs
Is it OK to lay a computer tower on its side?
How heavy is a PC?
An average desktop can weigh around 25-30 pounds.
But, it can easily go to 55-60 pounds if you have multiple GPUs and hard drives.
Can you put bubble wrap inside a PC?
Yes, you’re free to.
Anti-static bubble wrap can protect your PC from static charge.
Conclusion
Keeping your PC in a proper condition is essential during a journey.
you could easily ensure it by taking adequate packing and care.
Your desktop PC may not receive special treatment when transported in a car.
It can receive damage anytime for not being given proper attention.
In this article, Ive provided all the safety measurements and ways to pack your desktop correctly.
I believe you are using these procedures to keep your PC safe while transporting.