The pump is the most crucial part of a liquid cooling system.
The whole circulation of the fluid depends on the pump.
Ensuring the pumps functionality is a life & death situation for a liquid cooler.
In this article, I will convey how to check the pumps status with some tips for your cooler.
In other words, checking the pump if its circulating the liquids & helping the CPU to cool down.
So, how to verify if the pump is on the job?
Here are the ways to check the pumps functionality:
1.
But to get the sensor read, the pumps fan connector must be connected to the motherboards fan header.
So it is always recommended to connect with the mainboards fan header, in case of easy troubleshooting.
So, how to check the CPU pump RPM?
The system fans akaSYS_FANor chassis fan that is labeled asCHA_FANcan also work as a substitute for the pump.
The function will be the same.
If you are comfortable with BIOS, it is also an option to check the pump speed.
Like the software, it is also pretty straightforward.
As I have an X570 Aorus Extreme mainboard, I will guide you through my mobo interface.
Here are the steps to check the pump status from BIOS:
There you will find the fans speed.
It is also possible to go to theSmart Fanpage by pressingF6.
In case you dont see the page, youll find it in theAdvanced BIOS configs.
Execute Physical Test
If you have to use aMolexconnector, then you will not get a sensor read.
Then how can you know about the pumps status?
In this condition, you might physically examine the pump whether its running or not.
Perform External Test
For the external check, you have to take out the pump from the casing.
You will require a 12V adapter for this test.
But what if you detect the pump is malfunctioning after doing these tests?
Continue reading to find out.
This will overheat the PC components quickly.
So the cooler needs some immediate maintenance.
Additionally, clean dust from the radiator & clean the fans.
Now after doing this hassle work, what will happen if the cooler still is not giving sufficient performance?
Consider refilling the coolant.
But has your liquid cooler reached its end?
Read along to know more about the lifespan of a liquid cooler.
In case you are planning to upgrade, check out the reviews for the5 best water cooling pumps.
How to Make Your Liquid Cooler Last Long?
So, how long does a CPU pump last?
It depends on the usage & temps.
Besides that, the pump is the one that always runs when the system boots.
However an average estimated lifetime for a pump is usually around 8 years if proper steps are taken.
As already mentioned, it needs proper handling.
My friends liquid coolerNZXT Kraken M22lasts for only 2 years, as he didnt service it.
This is the right place if you want to increase the longevity of your cooler.
I will provide some tips that helped to withstand my CPU cooler till now.
FAQs
What is the difference between Liquid Cooler & Air Cooler?
Is water cooler bad for PC?
Besides that, it needs proper maintenance on a regular basis for the long run.
If you’re able to afford those, its a better choice than an air cooler.
But if you are an installation & forget guy, the air cooler will be more suitable for you.
Can I run a PC without a liquid cooler?
A liquid cooler is overkill for general users, but necessary for hardcore overclock enthusiasts.
Final Thought
The pump is the engine of a liquid cooler.
So ensuring its functionality is crucial to spin up the liquid cooler.
