Many users, including you, install a new SATA SSD on the PC to boost its performance.
After the installation, you may notice you better get the speed you expected.
But you are not.
Here I will explain how you’re able to activate AHCI in Windows 10.
So, tag along.
What is AHCI Mode & Why Do you gotta Enable It?
AHCI stands for Advanced Host Controller interface.
You are probably wondering why you oughta activate it for your PC.
The real reason is that enabling AHCI mode reduces the significant amount of travel required for data searches.
That means your PC responses from your SATA SSD or hard drive increase by 20-30%.
All current motherboards support AHCI.
Some even come with it by default.
I have explained the process of enabling AHCI in the following section.
you’re able to also check our article on how toenable SLI in BIOS.
you’ve got the option to use the command prompt or the registry editor to enable it.
Though when you load the Windows OS on your PC, it automatically sets to AHCI.
But if it doesnt, you’re free to still enable AHCI in Windows 10 after installation.
Here are the methods to enable AHCI mode in windows 10:
1.
Use Command Prompt
Command prompt, or cmd is a default Windows command line interpreter tool.
Using a couple of commands, you’re free to effortlessly activate AHCI.
Lets see how to do that.
The AHCI drivers will automatically install in your Windows.
Read our excellent guide if you dont know how toget out of safe mode in Windows 10 or 11.
Another way to enable AHCI is by using the registry editor.
To do that, you have to modify some files from the registry.
But be cautious while you edit any files inside the registry app.
Any incorrect editing can cause severe issues on your PC.
Change the files I mention here.
While the PC is on boot, the AHCI driver will install automatically.
Once the installation is complete, the PC will ask for a restart again.
When you give your PC the required restart, enabling AHCI is complete.
FAQs
Should I activate AHCI mode?
Yes, you should.
AHCI mode allows the PC to work 20 to 30% faster than usual.
So, when you activate it, the PC will perform any function quicker and save more time.
How do I enable AHCI mode?
To switch on the AHCI mode, you oughta go to the BIOS.
To enter the BIOS tweaks, start or reset your PC.
Press the boot menu key(F2, F8, etc.).
You must find System or Hardware configuration(the option name can be different) and SATA mode.
In the SATA operation, set it to AHCI.
How do I know if my SSD is in AHCI mode?
Go to gear Manager first to know if your SSD is in AHCI mode.
Expand the IDE ATA/ATAPI Controllers menu.
Conclusion
AHCI is far better and faster than IDE.
If there is no AHCI option in BIOS, it sets as default.
You dont need to change anything to get the AHCI mode.
I hope by following the methods, you have successfully enabled AHCI.
If you have any questions, leave them in the comment section.
I will gladly answer them.
