So, without wasting any time, lets start.
Why Does Nintendo Switch BSOD Occurs?
Thats a good sign, however.
A simple hard reboot is enough to sort this issue out.
In a worst-case scenario, Nintendo Switch might refuse to turn on at all.
This is what requires special attention and sequential procedure to fix the problem.
So, how would you fix my Switch in such an instance?
If yourSD card is down properly with the NintendoSwitch, check out our troubleshooting guide.
Next, perform a forced restart and see if your unit powers on.
Even if you use a slow charger, that is fine.
All we need is an indication that the Switch is charging, and its display is okay.
A12-secondpower button hold will cause the Switch to shut down.
A Switch that is used with a TV and a dock can also experience this black screen issue.
Then try docking and undocking your Switch.
Most of the time, the console will revert to its usual operating configuration.
Here are the steps to fix the Nintendo Switch black screen of death:
1. you better plug out everything from your switch and then perform a force shutdown on your switch.
Do not release the power switch then.
After 12s press the power switch once and then it should turn back on.
This is a good indication of your switch.
Specifically that the display and the speakers are working.
If the Switch powers on normally after that, you are good to go.
Fire up a game and check how it handles it.
But if you cannot power up your switch normally, check out the next solution.
The new revision for Switch drastically improved its battery life.
Read our findings where we tested howlong can a Nintendo Switch battery last.
What if your trusty charger is faulty and the Switch is out of juice?
This is why plug in a different charger to the Switch that is rated for100-240V, 1A.
Use a different USB pop in-C cable as well.
Leave it for a while.
Maybe a good20-30 mins.
Now perform the hard reboot with the power cycle again, as Ive demonstrated in the previous method.
Your Nintendo Switch should come back to life this time.
you’ve got the option to choose to keep your data during this process.
But anything on a micro SD card will be erased.
After the reset, your Nintendo Switch will automatically restart.
Update the Switch in Recovery Mode
This step helped me out.
My unit needed an update from the recovery mode.
Maybe it was a software issue that prevented the bootup.
Just like every other console, the Switch also has its own safe mode named recovery mode.
From the recovery mode, you’re able to upgrade your console.
Many people have performed it, and it fixed their problems.
Check our separate guide on troubleshooting awater-damaged Nintendo Switch.
The display LCD is one of the primary candidates for failure at this point in troubleshooting.
you could do a simple check to know if your display needs replacing.
Point a flashlight close to the Switchs display as it is powered on.
If you just see a faint screen of the Switchs interface, then your display needs replacing.
Are you not getting a proper battery life out of your joy cons?
Check our article, where we investigate why yourSwitch controller is not charging.
Do keep that in mind; hard will erase all of your data along with bugs and glitches.
Heres how to perform a hard reset on Nintendo Switch:
This process will take some time to finish.
double-check not to lose power during the reset.
Once done, your Switch will boot normally.
A serious motherboard issue can be present.
In that case, a hardware technician or Nintendos support team can help you out.
it’s possible for you to contactNintendo Support.
Frequently Asked Questions
Why is my switch stuck on a black screen?
A problem with system software can cause a black screen on Nintendo Switch.
How do I reset my unresponsive Switch?
you might initialize a Nintendo Switch when it becomes unresponsive.
To do this, press the power and volume buttons at the same time for 15s.
Then release them as you see the Maintenance mode.
From here choose Initialize console without removing data and your console should reset.
Many feel the firmware is responsible, while others believe the problem is hardware-related.
Third-party docks have been blamed by a few; however, this has yet to be proven.
Hopefully, you’re able to fix the problem by reading the guideline.
And if you still have any queries, you’re able to always reach out to us.
