The anxiety is over 9000!
The fear of losing all your important data has taken you aback.
[image]
Many users, including me, faced the same issue at least once in their lifetime.
I have also studied numerous other cases to narrow down the potential underlying factors.
Why Hard Drive Not Showing in Boot Priority in Windows 10?
Your motherboard checks for all the required components, including Bootable Hard Drive.
If it fails, then you will have no post.
A disabled hard drive can lead to an undetected boot gear.
Hence hard drive does not show in boot priority.
When the hard drive runs on an old driver, it may fail to be detected.
As a result, it will not show up in boot priority.
A hard drive is connected with aSATAcable to a computers motherboard.
It also needs a power source to operate.
Thus another cable connects the hard drive with the power supply.
If one of the cables gets damaged or loosens up, the system wont find the hard drive.
Hence, the hard drive will not appear in boot priority regardless of your OS.
Hard drive failure is straight forward as it sounds.
If the hard drive fails, it wont be detected as a bootable unit.
Master Boot Record (MBR)is a program found in each partition on the disk.
It stores all the information about each partition and its size.
While booting a computer, it tries to communicate with the hard drive and tries to load OS.
For excellent communication, MBR needs to load at first.
The motherboard will not detect the hard drive if the MBR is corrupted.
Check out our separate post onDisadvantages of Not Activating Windows 10.
However, it requires some caution and sequential procedure to be followed.
Here are the methods to fix hard drive not showing up in boot priority:
1.
Enable Hard Drive in BIOS
Enabling a hard drive in the BIOS often fixes undetected boot drive problems.
Now your hard drive should show up in the Boot Priority menu.
Heres a complete guide on 5 effective ways toUninstall IE11 Windows 10
2.
Check and Replace SATA Cable
Visual inspection is the primary stage of checking a cable.
If any deformity is found, further steps are required to ensure the cord is damaged.
Also, check out our separate post onbest places to buy Windows 10 key.
Reconnecting and ensuring the connections are firmly fixed an undetected HDD problem.
Therefore, I always recommend you ensure a firm connection and re-connect your component.
If your hard disk fails to boot into Windows, fixing it can be tricky.
And it’s possible for you to boot into Windows.
If not, simply reinstall Windows.
It should solve your problem if it were due to the impaired driver.
Heres a efficient guide on how to fixRandomize Photos in a Folder.
Reset BIOS
Hard drives can be undetected due to BIOS.
I found such cases in the past.
Resetting the BIOS can be a cure for this problem.
Here is one of the easiest ways to Reset BIOS:
You should see your hard drive listed there.
Set Hard Drive Boot Order at Top
Incorrect boot order often results in not booting into Windows.
It also may cause undetected bootable hard disk drive.
you better replace it with a new drive.
it’s possible for you to contact any data recovery shop to recover data from your dead drive.
If you are lucky, they will be able to retrieve all the critical data.
However, you might venture to repair your drive.
Final Note
Being unable to boot into the OS is really frightening as well as frustrating.
People often spend a lot of time figuring out the exact reason.
