Blurred image is an issue that is complained about by many people.
Having a distorted image takes place if you buy a low-quality gear like google cardboard or similar.
So, lets not waste time and head towards the solutions.
Why is my VR blurry?
VR is blurry because of the optics and the eye box.
The reasons behind blurry VR are poor quality lenses and lack of sweet spot of the headset.
A super low-quality lens will give you a blurry and disturbed vision compared to a high-quality lens.
Imagine comparing Google Cardboard with Oculus Rift.
Oculus Rift S will show less blurry effects compared to google cardboard.
Also, it is very difficult to make lenses that are less weighted and having a large eye box.
Adjusting your eye-position with the lens is the major factor to see clear images.
Todays generation VR headsets have this feature of positioning the lens with the Eye.
However, I used Google Cardboard and my experience with it was not good enough.
Leaving that part, VR screen blur only depends on these two factors mainly.
Physical factors can be reduced easily but, lens-related problems are very hard to fix.
Related contents you should read aboutHow Long Should You Use a VR Headset.
I know, I felt the same.
But dont worry, I compiled up with effective solutions to fix this problem.
Even if your eyelashes accidentally touches the lenses, it will leave the residue on the glass surface.
You may think of using a damp cloth or your t-shirt.
But wait, it will worsen the quality of the lenses leading to stains.
In this case, you should use a microfiber cloth to give a quick polish to the two lenses.
Glass wearers have faced lens blurring issues most often.
The tip is to daily use microfiber cloth twice before and after playing with your VR.
Re-adjust to find your own sweet spot.
Condensation often leaves stain marks on lenses.
To solve this key in of issue, you oughta activate your VR headset 10 minutes before playing.
This will heat up the machine removing the haziness of the screen.
But, before that, do check our latest post on How toClean VR Headset Foam.
Not everyones face punch in is similar.
Some have long face shape, some have round while some have oval-shaped.
Be careful while doing so, you dont need to be rough with it.
Be gentle enough and confirm you dont touch the lenses.
Use the headband to adjust the gear according to your suitability.
If you see double-vision or fog only then, rotate the headband.
Otherwise, leave as it is.
You should feel comfortable bending down without the feeling that the headset will be slipping off.
For glass wearers, things would be a little difficult.
The power of your lenses and the gear lens should match its lining.
The main key is to adjust the headset without touching the lenses until the vision gets totally cleared.
you could fix the VR headset not focusing problems by correcting the position of the set with your eye.
Check out the easiest way to know How toclean VR Headset Lens.
Adjust the Scope to get an in-focus image.
Its normal to see the screen slightly blurry for far vision, while the center remains clear.
Sometimes, due to poor light quality, the headsets will make you see dark and hazy.
Try brightening the room if you see unclear pictures.
If you cannot position yourself within the frame then, try adjusting the PlayStation camera.
Calibrate the controls properly to see clearly through your PSVR.
This is a similar jot down of issue almost faced by 80% VR users.
Lets get to know why you are facing lag issues.
Some more guides onFix PSVR Headset flickering.
Why is my VR lagging?
VR lag occurs because of the Motion Sensor problem and because of faulty USB connection.
VR headsets have several motion sensors for detecting your environment to give you an experience that is beyond reality.
If these sensors are losing its durability, you will see motion lag.
For such cases, you have to lower the TAA or disable it.
The most common question I frequently face is, how can I reduce lag issues in my Oculus Rift?
Re-plug the Display port and USB drive.
you might easily get around with it.
