The Zen 3-based Ryzen 5 5600 X is one of the best-performing mid-range CPUs right now.
As it is unlocked, there is the potential to increase its performance by overclocking.
But that would require a beefy cooler that can handle the extra heat.
And we have covered every price segment to make your purchasing decisions easier.
Best CPU Coolers for Ryzen 5 5600X
1.
Featuring two high-quality 1400 mm A15 fans, you’re able to never doubt its cooling capability.
To check this, we ran astress teston AIDA 64.
The maximum temperature was 44 degrees.
As for acoustics, the cooler never exceeded 48 decibels.
Also, it is super easy to install.
The mounting brackets are the same as what you would get with an AMD motherboard.
Just screw it in, and the heatsink sits securely.
Noctua D15 is rated to dissipate up to 220 watts of heat.
This is a great choice if you plan to overclock your 5600X.
One drawback of this cooler is its humongous size.
You have a 66 mm clearance for your memory when the front fan is lifted.
So, do check the dimensions of your RAM to be certain of a perfect fit in the case.
TheNoctua NH-D15 chromax.blackhas been the best-performing air cooler for a while.
Best Silent Cooler: Scythe Mugen 5 Rev.
you might find this on sale near 55 dollars on Amazon.
For that price, it is a great cooler that puts its main focus on silent operation.
You get a single 120 mm fan with six heat pipes.
The pipes are bent, allowing a displaced design.
The cooler is not exactly huge and should fit in most cases.
You get the mounting brackets for Intel and AMD chipsets in the box.
A screwdriver and somethermal pasteare included, which is nice to have.
The installation was easy, with just the backplate mounting experiencing some stiffness.
Coming to the temperatures now, we got 60 degrees when applying load with the stock clock speeds.
During this time, the noise level was quite low at 36 decibels even after applying load.
Only when the fans were ramped to the maximum 1500 RPM the noise was audible at 45 decibels.
However, it is quite unlikely that you would need to execute the cooler at suchhigh speeds.
The Scythe Mugen 5 is a great silent cooler that performs really well.
The Thermaright Peerless 120 comes with adual tower heatsink instead of a single towerfor under 50 bucks.
You also get two 120 mm fans included.
I mean, it is unheard of in this price bracket.
You also get six heat pipes, which are great for dissipating heat.
Even the cooler does not weigh that much at 890 grams.
This can raise suspicions about its performance.
But thankfully, that is not the case.
Even when maxing out the CPU during a stress test, we got 61 degrees.
Whenoverclocking the CPUand running the same load, we never got past 70 degrees.
As for the noise, we recorded a maximum noise of 35 decibels.
This was a great performance from the included PWM fans.
Coming to the box contents, you get separate mounting brackets for the CPU.
Despite sporting a dual heatsink, the Thermalright is not that large to cause problems to your RAM slots.
Highly recommended under 50 dollars.
With a 360 mm radiator and fullARGB supportfor the fans, you will not miss out on anything.
The best thing about 150i is the included Corsair Commander Core.
You get the mounting brackets for the AMD as well as the AM5 platforms.
Depending on the jot down of backplate, appropriate screws are included to hold it securely in place.
As for the radiator, there are 20 fins per inch.
you might house three fans next to each other.
The radiator with the fans occupies 54 mm in terms of height.
This should provide plenty of clearance in a large case.
Using the iCUE software, you’ve got the option to change the fan and pump speed.
We tested the pump by running it at 2200 RPM.
There are different pre-set modes put in by Corsair.
So, how about the temps?
When running the CPU at full load, we got a maximum of 50 degrees.
This was just running some random workloads.
We tested the noise level by running it at the maximum fan speed.
As for the RGB, you get 33 addressable LEDs.
This is another win for the H150i in terms of customizability.
The Corsair H150i Elite Capellix is a top-notch high-end360mm AIO coolerthat you’re able to buy.
This is a 240 mm AIO unit, which means it is pretty easy to install.
You get mounting brackets and accessories for both Intel and AMD processors.
Arctic has also included their excellent MX5thermal pastein the box, which you should probably apply.
As for the radiator, it is 38mm in height, even without the fans attached.
This can pose problems with clearance with the RAM sticks.
The radiator, though, is high quality, with a fin count of 14 per inch.
Due to its thickness, it can dissipate more heat quickly.
If you see the AIO cold plate, there is a surprise waiting for you.
Arctic has installed a 40 mm PWM fan which can cool down the VRM.
And you get full control of its speed, which makes it awesome.
And how about the design?
I dont think any manufacturer has come up with a cooler cold plate than this.
Kudos to Arctic for that, and hope other manufacturers can take notes from this.
Lets talk about performance now.
When running a stress test that targets 200 watts, we got a maximum of 60 degrees.
And it was super quiet too.
We did not measure the noise to go past 35 decibels during any of the tests.
That is great work done by the included P12 fans.
The model we tested did not come with any RGB.
But there is an ARGB model which will cost you20 dollars moreif you want to go for it.
Its performance is identical to the one we tested, so you are not sacrificing any cooling.
The Arctic Liquid Freezer II is the best cheap240 mm AIO coolerthat we have tested.
With fantastic cooling, you are not really sacrificing anything.
Overall, it is a great choice for mid-range builds.
This will properly utilize the CPU cooler and help keep your system healthy.
The layer of dust that forms over the fans slows the fan speed to a great extent.
That is why you should always clean them regularly.
Overclocking might enhance your systems performance to the next level.
But you cant deny the fact that this process pushes the system to its limits.
Sometimes thetemperatures can riseto certain levels, which can be harmful to the system.
I suggest you be cautious enough while overclocking.
Such cautiousness will better your systems cooling ability.
If you dont ensure a secure connection of tubings, it increases the chances of possible leakage.
Thus, it somewhat hampers the overall cooling performance.
Moreover, anairflow PC caseis recommended to get the full potential of coolers.
Frequently Asked Questions
Is the wraith stealth cooler enough for Ryzen 5 5600x?
If you arent up for overclocking, then wraith stealth coolers are good.
Are Ryzen Stock Coolers good for overclocking?
Ryzen stock coolers are not meant for overclocking.
They are designed to cool the CPU at stock speeds.
Can you overclock a Ryzen 5 5600X?
Yes, the Ryzen 5 5600X comes with an unlocked multiplier similar to the rest of the lineup.
But keep in mind that you need a good cooler for that.
Do I need water cooling for Ryzen 5 5600X?
When overclocked, the Ryzen 5 5600X produces heat, so you need a good cooler to dissipate that.
A water cooler is not necessary, but you’re able to use it.
An AIO is the best choice for it, instead of an open loop cooling.
